YUTONG Honed Tube/ cylinder honed barrel/big size honed tube/DIN2391 ST5...

评论

发表评论

此博客中的热门博文

WHAT MATERIAL IS USED FOR THE CYLINDER BARREL?

图片
  As the main component of the hydraulic cylinder, the processing quality of the   cylinder barrel  directly affects the life and reliability of the entire product. The cylinder has high processing requirements, and its inner surface roughness is required to be Ra0.4 ~ 0.8um, and the requirements for coaxiality and wear resistance are strict. Generally, it is processed and produced by the principle of  honing  or rolling. The common materials of cylinder barrel are SAE1020, 1026, 1045,  ST52 seamless honed tubes , the steel tube is honed or rolled to meet the roughness requirement within 0.4μm. The low-pressure oil cylinder can use 1020 steel pipe, and the high-pressure oil cylinder can use CK45 steel pipe. As a professional cylinder barrel supplier, manufacturer,exporter in China,  Wuxi YUTONG  has more than 20 years production experience, we sell hydraulic honed tubing to customers and provide full range of technical support. Imperial sizes...
阅读全文

The heat treatments for Seamless Steel Tube For Hydraulic Cylinder Barrel

图片
  Most of the hydraulic cylinder is composed of a cylinder, cylinder head, piston and  piston rod  and sealing device. The comprehensive performance of the cylinder such as pressure resistance, wear-resistance and fatigue strength, determines the service life of the hydraulic cylinder. The cylinder is usually required to withstand pressure within 20Mpa (continuous pressure), and the application of mixing and pressure can even reach 55Mpa. General hydraulic cylinder made of carbon steel or low alloy   cold-drawn steel tube , such as ST52 E355, which treated by usually used to stress annealing. The heat treatment depends on the performance of the steel after cold working conditions of the hydraulic cylinder in actual production are mostly use the following heat treatment process for processing. Stress relief annealing adopts a heat treatment process lower than the heating temperature of recrystallization, which aims to eliminate the residual stress in the steel tube ca...
阅读全文

The Hardness Of Ck45 induction hardened Chrome Rod

  Induction hardening  is a non-contact process used for the surface hardening of steel and other alloys. The parts to be treated are placed inside a copper coil and heated above their transformation temperature by applying an alternating current to the coil. The   cylinder rod   is then quenched to retain the enhanced properties of the steel alloy. During this process, the   induction hardened chrome rod   core remains unaffected and its physical properties remain the same. CK45 is a medium tensile carbon steel supplied in the turned, induction hardened and straightened, precision ground, polished, chrome plated and final polished condition, with a typical base metal tensile strength of 670 Mpa, an induction hardened case of 3.2mm thick approx. to Rc55-65, plus a typical hard chrome plated surface hardness of HV 1000 - 1150.Characterised by an extremely smooth surface finish with excellent wear and corrosion resistance, supported by an induction harde...
阅读全文